Module stability monitoring unit 2

From uCtrl.net

(Redirected from MSMU2)

Jump to: navigation, search

The Rack box project is being discontinued!
I am moving to a new location, and therefor terminating the Rack box project, my plan is to build an even bigger system based on slot-in cards in a full size rack. I'll keep you posted. Feel tree to leave a comment if you have any question.

MSMU2 installed in the Rack box

MSMU2, driven by AVR AT90S8515.

Information

Every AVR driven module has an output with a pulsating signal called lifesignal. This is connected to MSMU2, if this signal should come to an end MSMU2 will sound a module timeout alarm. The signal needs to be absent for 10 seconds before the alarm sounds. MSMU2 can monitor 15 modules, a LCD display shows the status:

#n/a means not connected
Ok→21 means ok, and the remaining timeout

If a module should fail MSMU2 will only show the failed module numbers, alarms must be reset manually using a push button.

Monitored modules

Click here for a list of monitored modules.

I/O

Inputs

PA2 Module 1
PA3 Module 2
PC2 Module 3
PC3 Module 4
PC4 Module 5
PC5 Module 6
PC6 Module 7
PC7 Module 8
PD0 Module 9
PD1 Module 10
PD2 Module 11
PD3 Module 12
PD4 Module 13
PD5 Module 14
PD6 Module 15
PD7 Reset

Outputs

PB0 LCD Db7
PB1 LCD Db6
PB2 LCD Db5
PB3 LCD Db4
PB6 LCD E
PB7 LCD Rs
PA0 Module error (to SLCU)
PA1 Lifelight

Connectors

D-Sub 9-pin

5v
0v
Reset
Module error LED

D-Sub 15-pin

Module 1 → 15

LCD display

12345678
MSMU #2
Running
1  Ok>21
4  #n/a
10 FAIL!
Reset!

Parts list

Quantity	Supplier	Part number	Description
1	Elfa	73-665-29	AVR-RISC, AT90S8515
1	Elfa	50-195-00	Plastic Enclosure (1591), 120x80x59mm
1	Elfa	44-055-10	D-Sub soldering cups, 15 pin female
1	Elfa	44-055-51	D-Sub soldering cups, 9 pin male
1	Elfa	44-055-02	D-Sub soldering cups, 9 pin female
1	Elfa	48-162-11	DIL socket, 40-pin, 15,24mm
2	Elfa	48-087-96	Mounting rail holder, Metal
2	Elfa	70-005-57	Small Signal Diode, 1N4148/Ph
1	Elfa	67-008-01	Aluminium electrolytic capacitor, 10uF 25V
1	Elfa	65-851-94	Ceramic Disc Capacitor, 1 nF 100V
2	Elfa	65-848-58	Ceramic Disc Capacitor, 22 pF 100V
1	Elfa	74-501-82	Quartz, 4,0Mhz
1	Elfa	75-511-61	Dot matrix LCD display, 16x1 LED
1	Elfa	75-005-80	LED 5mm clear, Blue, 4.9V, 20mA, 350mcd, 12°
1	Elfa	75-016-79	LED 5mm clear, Green, 2.1V, 20mA, 385mcd, 6°
2	Elfa	75-031-96	LED holder 5mm, RTC51, black plastic
16	Elfa	60-106-15	Carbon film resistor 5% 1/4W, 10 K
1	Elfa	60-103-83	Carbon film resistor 5% 1/4W, 120 Ohm
18	Elfa	60-104-33	Carbon film resistor 5% 1/4W, 330 Ohm
2	Elfa	60-105-73	Carbon film resistor 5% 1/4W, 4,7 K
1	Elfa	64-361-82	Trimmer, carbon, 10k horizontal
1	Elfa	33-167-26	Fuse 5x20 mm, 500 mA, quick-acting
1	Elfa	33-150-17	Open fuse holder, PCB, 5x20mm
1	Elfa	33-150-25	Open fuse holder, PCB, Protective cover
1	Elfa	71-027-59	Transistor BC547B, NPN, 45V 0.1A 0.625W
1	Elfa	35-084-21	Push-button Switch, 1-pole, 1A, 50VAC, off-(on)
1	Elfa	35-305-16	Toggle switch, 1-pole, micro, on-on

Images

Box	Work	Inside	LCD mounted
DIN brackets	LCD test	PCB	PCB
MSMU2 installed in the Rack box	MSMU2 installed in the Rack box

Schematic drawing

Files

Datasheet LCD display 16x1: Media:lcd_16x1_tn_led.pdf

Source code

The program is written in basic, using Bascom-AVR.

'--------------------------------------------------------------
'                         Thomas Jensen
'--------------------------------------------------------------
'  file: AVR_MSMU2
'  date: 23/12/2006
'--------------------------------------------------------------
$regfile = "8515def.dat"
$crystal = 4000000
Config Portd = Input
Config Portc = Input
Config Portb = Output
Config Porta.0 = Output
Config Porta.1 = Output
Config Porta.2 = Input
Config Porta.3 = Input
Config Watchdog = 1024
 
Config Lcdpin = Pin , Db4 = Portb.3 , Db5 = Portb.2 , Db6 = Portb.1 , Db7 = Portb.0 , E = Portb.6 , Rs = Portb.7
Config Lcd = 16 * 1
 
Dim A As Byte
Dim B As Byte
Dim Alarm As Integer
Dim Alarmled As Integer , Is_shown As Integer
Dim Modul(15) As Byte
 
Deflcdchar 0 , 32 , 4 , 2 , 31 , 2 , 4 , 32 , 32            ' pil
 
Alarm = 0
Alarmled = 0
Is_shown = 0
Const Timeout = 21
 
'boot
Porta.0 = 0
Porta.1 = 0
 
Cls
Cursor Off
Cls
Locate 1 , 1
Lcd "MSMU #2"
 
For A = 1 To 15
    Porta.0 = Not Porta.0
    Porta.1 = Not Porta.1
    Waitms 250
Next A
 
Porta.0 = 0
Porta.1 = 0
 
Cls
Locate 1 , 1
Lcd "Running"
Waitms 1500
Cls
 
Start Watchdog
 
Main:
 
'lcd display
For B = 1 To 15
Gosub Sjekk
 
    If Alarm <> 1 Then
    Is_shown = 1
    Waitms 50
    Locate 1 , 1
    Lcd B
      Locate 1 , 4
      If Modul(b) > 1 Then Lcd "Ok" ; Chr(0) ; Modul(b)
      If Modul(b) = 0 Then Lcd "#n/a "
      For A = 1 To 9
      Waitms 50
      Gosub Sjekk
      Next A
    End If
 
    If Modul(b) = 1 And Alarm = 1 Then
    Is_shown = 1
    Waitms 50
    Locate 1 , 1
    Lcd B
      Locate 1 , 4
      Lcd "FAIL!"
      For A = 1 To 9
      Waitms 50
      Gosub Sjekk
      Next A
    End If
 
 
Endoflcd:
 
If Is_shown = 1 Then
For A = 1 To 15
If Modul(a) > 1 Then Decr Modul(a)
If Modul(a) = 1 Then Alarm = 1
Next A
 
'lifelight
If Alarm = 0 Then Porta.1 = Not Porta.1
If Alarm = 1 Then Porta.1 = 0
 
'setting alarmled
If Alarm = 1 And Alarmled = 0 Then Alarmled = 2
If Alarmled > 0 Then Alarmled = Alarmled - 1
If Alarmled = 1 Then Porta.0 = 1
If Alarmled = 0 Then Porta.0 = 0
End If
 
Is_shown = 0
Cls
Next B
Cls
 
Goto Main
End
 
Sjekk:
'setting 15 second timeout
If Pina.2 = 0 And Modul(1) <> 1 Then Modul(1) = Timeout
If Pina.3 = 0 And Modul(2) <> 1 Then Modul(2) = Timeout
If Pinc.2 = 0 And Modul(3) <> 1 Then Modul(3) = Timeout
If Pinc.3 = 0 And Modul(4) <> 1 Then Modul(4) = Timeout
If Pinc.4 = 0 And Modul(5) <> 1 Then Modul(5) = Timeout
If Pinc.5 = 0 And Modul(6) <> 1 Then Modul(6) = Timeout
If Pinc.6 = 0 And Modul(7) <> 1 Then Modul(7) = Timeout
If Pinc.7 = 0 And Modul(8) <> 1 Then Modul(8) = Timeout
If Pind.0 = 0 And Modul(9) <> 1 Then Modul(9) = Timeout
If Pind.1 = 0 And Modul(10) <> 1 Then Modul(10) = Timeout
If Pind.2 = 0 And Modul(11) <> 1 Then Modul(11) = Timeout
If Pind.3 = 0 And Modul(12) <> 1 Then Modul(12) = Timeout
If Pind.4 = 0 And Modul(13) <> 1 Then Modul(13) = Timeout
If Pind.5 = 0 And Modul(14) <> 1 Then Modul(14) = Timeout
If Pind.6 = 0 And Modul(15) <> 1 Then Modul(15) = Timeout
Reset Watchdog
 
'reset
If Pind.7 = 0 Then
   Alarm = 0
   For A = 1 To 15
   Modul(a) = 0
   Next A
   Cls
   Locate 1 , 1
   Lcd "Reset!"
      For A = 1 To 9
      Waitms 50
      Reset Watchdog
      Next A
   Cls
   Waitms 50
   B = 0
   Goto Endoflcd
   End If
 
Return

Module stability monitoring unit 2

From uCtrl.net

Contents

Information

Monitored modules

I/O

Inputs

Outputs

Connectors

D-Sub 9-pin

D-Sub 15-pin

LCD display

Parts list

Images

Schematic drawing

Files

Source code

Personal tools

Namespaces

Variants

Views

Actions

Search

Navigation

Categories

projects

Toolbox